Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            ABB Metrawatt METRAHIT 14: (1 year) CAL VER /5500
DATE:                  20-Aug-97
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.6 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       19
NUMBER OF LINES:       107
CONFIGURATION:         Fluke 5500A
=============================================================================
#
# Compatibility:
#   5500/CAL 4.0 or MET/CAL 4.0 or later.
#
# Subprocedures:
#   None
#
# Required Files:
#   None
#
# System Specifications:
#   TUR calculation is based on specification interval of the accuracy file.
#   The default 5500A accuracy file contains 90 day specs.
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P J                          F        W
  1.002  ASK+   R       K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS
  1.004  DISP         Warm-up time: 30 min. - REQUIRED
  1.004  DISP         Temperature : 18 - 28 degC
  1.004  DISP         Humidity    : <85%
  1.005  DISP         [32]                WARNING
  1.005  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.005  DISP         of this calibration.  DEATH ON CONTACT may result if
  1.005  DISP         personnel fail to observe safety precautions.
  1.006  HEAD         INITIAL SETUP
  1.007  DISP         Turn on the UUT.
  1.008  DISP         Set the rotary switch to VDC.
  1.009  DISP         Connect the 5500A to the UUT as follows:
  1.009  DISP         [32] 5500A NORMAL HI to UUT V/Ohm/Diode
  1.009  DISP         [32] 5500A NORMAL LO to UUT COM
  1.010  HEAD         {DC VOLTAGE}
  1.011  HEAD         DC VOLTAGE:  {300mV Range}
  1.012  5500   300   290.0mV        0.5% 0.3U                             2W
  2.001  HEAD         DC VOLTAGE:  {3V Range}
  2.002  5500   3     2.900V         0.5% 0.001U                           2W
  3.001  HEAD         DC VOLTAGE:  {30V Range}
  3.002  5500   30    29.00V         0.5% 0.01U                            2W
  4.001  HEAD         DC VOLTAGE:  {300V Range}
  4.002  5500   300   290.0V         0.5% 0.1U                             2W
  5.001  HEAD         DC VOLTAGE:  {1000V Range}
  5.002  5500   1000  1000V          0.6% 1U                               2W
  6.001  HEAD         {AC VOLTAGE}
  6.002  DISP         Set the rotary switch to VAC.
  6.003  HEAD         AC VOLTAGE:  {3V Range}
  6.004  5500   3     2.900V         1% 0.002U     1kH            SI       2W
  7.001  HEAD         AC VOLTAGE:  {30V Range}
  7.002  5500   30    29.00V         1% 0.02U      1kH            SI       2W
  8.001  HEAD         AC VOLTAGE:  {300V Range}
  8.002  5500   300   290.0V         1% 0.2U       1kH            SI       2W
  9.001  HEAD         AC VOLTAGE:  {1000V Range}
  9.002  5500   1000  1000V          1% 2U         1kH            SI       2W
 10.001  HEAD         {RESISTANCE}
 10.002  DISP         Set the rotary switch to Ohms.
 10.003  DISP         Connect the 5500A to the UUT as follows:
 10.003  DISP         [32] 5500A AUX HI to UUT V/Ohm/Diode
 10.003  DISP         [32] 5500A AUX LO to UUT COM
 10.003  DISP         [32] 5500A NORMAL HI to UUT V/Ohm/Diode
 10.003  DISP         [32] 5500A NORMAL LO to UUT COM
 10.003  DISP         Connect the sense leads DIRECTLY to the UUT.  Connect
 10.003  DISP         the NORMAL leads to the SENSE leads AT the UUT.
 10.004  HEAD         RESISTANCE:  {300 Ohm Range}
 10.005  5500   300   290.0Z         0.7% 0.3U                             CW
 11.001  HEAD         RESISTANCE:  {3 kOhm Range}
 11.002  5500   3     2.900kZ        0.7% 0.001U                           CW
 12.001  HEAD         RESISTANCE:  {30 kOhm Range}
 12.002  5500   30    29.00kZ        0.7% 0.01U                            CW
 13.001  HEAD         RESISTANCE:  {300 kOhm Range}
 13.002  5500   300   290.0kZ        0.7% 0.1U                             2W
 14.001  HEAD         RESISTANCE:  {3 MOhm Range}
 14.002  5500   3     2.900MZ        0.7% 0.001U                           2W
 15.001  HEAD         RESISTANCE:  {30 MOhm Range}
 15.002  5500   30    29.00MZ        3% 0.01U                              2W
 16.001  HEAD         {DIODE CHECK}
 16.002  DISP         Set the rotary switch to Diode.
 16.003  DISP         Connect the 5500A to the UUT as follows:
 16.003  DISP         [32] 5500A NORMAL HI to UUT V/Ohm/Diode
 16.003  DISP         [32] 5500A NORMAL LO to UUT COM
 16.004  5500         0.5V           0.5% 0.1U                             2W
 17.001  DISP         Disconnect the test leads from the UUT
 17.002  HEAD         {DC CURRENT}
 17.003  DISP         Set the rotary switch to ADC.
 17.004  DISP         Connect the 5500A to the UUT as follows:
 17.004  DISP         [32] 5500A AUX HI to UUT A
 17.004  DISP         [32] 5500A AUX LO to UUT COM
 17.005  HEAD         DC CURRENT:  {10A Range}
 17.006  5500   10    10.00A         1.5% 0.01U                            2W
 18.001  HEAD         {AC CURRENT}
 18.002  DISP         Set the FUNCTION SWITCH : ACA
 18.003  HEAD         AC CURRENT:  {10A Range}
 18.004  5500   10    10.00A         1.5% 0.02U    1kH            SI       2W
 19.001  END